Remote E-KING 868-4C

E-KING 868-4C remote control available only in one colour which is black with grey buttons. An auto-programming Rolling-code keyfob for garage doors. The E-KING with the reference 868-4C is a 4-button remote control gate opener that uses the frequency 868 MHz. 

Product description and properties

Have you chosen to invest in a gate operator from the prestigious E-KING brand ? If your remote control is no longer functioning, it is time to replace it with a new compatible model. A rolling code auto-programming remote control, the E-King 868 4C transmitter has four buttons and is easily used by its ergonomics. 

For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the the main steps to assist you in programming your E-KING gate remote control.

Important information

NOTE: The colour of the buttons is important because it may define the frequency of this transmitter. The model displayed here is not compatible with the reference using the frequency 433 MHz with red buttons. 

ATTENTION: Please check your original E-King remote control to be sure that you need the 868-4C (frequency 868 MHz) and not the 433-4C II (frequency 433.92 MHz) model with red buttons. 

You can also find the frequency embossed on the back of your current remote control. If you can read 868 then you need the remote control displayed here.

What do you need to know about this remote control ?

The remote control’s operation

E-KING 868 4C a 4-channel rolling code remote control using the frequency 868 Mhz. This handheld transmitter is compatible with radio receivers working with frequency 868 Mhz.

The programming is quick and simple because it’s an auto-programming model.

E-King 868-4c is compatible with the following E-King gate remotes: 

• CARDALE AZAR 2060

• CARDALE AZAE 1122

E-KING 868 4C a 4-channel keyfob that controls all the movements of your gate and garage door...etc. according to your specifications and can control up to 4 automations. The frequency of this item is 868 Mhz.  

As for its programming, the device has an auto-programming system with 0 switch. 

868-4C remote control with 4 grey buttons for garage door operators. This model has a Rolling code type of encoding and is powered by a battery type CR2032. A hand transmitter with a high range up to 100m.

The registration of the e-king 868 4c only takes few minutes and the programming requires no special equipments. 

If you have difficulties in programming the remote, don’t worry, a manual is delivered with the remote control. 

Good to know

Choose a remote control that operates under the same frequency as your original model to guarantee the compatibility of the two items. Otherwise, your remote won’t function on your automatism. The coding system of your new device also must be identical to the one of your original remote control to successfully control your motorized gate. 

It is important to know that there are three types of programming (coding systems) : Switches, auto-programming, and programming in the receiver. 

To choose the correct remote control, it is highly recommended to consider the following criteria : the brand, the frequency, don’t neglect neither the number and the colour of the remote control buttons. These elements are usually used by the manufacturers to identify their products. 

Ergonomics

E-King 868-4C remote control is 64 mm long, a width of 38 mm and a thickness of 12 mm. If you are looking for a practical remote control with a good design and functionality choose right away the 868-4C. This transmitter is highly aesthetical, its special shape and reduced size make it very easy to use. It is also shock-resistant device thanks to its case manufacturers in a solid and resistant material which makes it very tough and strong under all kind of pressure or shocks. Its shape and 4 black buttons make it very elegant, can be used as a keyring or keyfob ! 

How to program E-KING 868-4C remote control ?

Important steps of the programming

Programming of your new remote control:

1. Connect your already-programmed remote control to your new one with the supplied clip. Press a button on your old remote control, keep it pressed down until the LED on your old remote control illuminates.

2. While keeping the button pressed down, press the button you wish to program on your new remote control. Keep it pressed down until the LED on your new remote control blinks, then remains lit constantly. Release the button.

3. Repeat the procedure for each button you wish to program. Wait 10 seconds.

4. Your new remote control is programmed.

With the receiver:

ATTENTION: Only use this method if you no longer possess any functioning remote control. This programming method will erase all of your already-programmed remotes.

1. Press and hold down the button P until the LED 2 blinks.

2. Press the button P several times until the LED 7 blinks.

3. Press the button on your new remote control, the LED 7 blinks more quickly.

4. Press the button P, then let it go. Wait 10 seconds.

5. Your new remote control is programmed.

Can’t seem to program your E-KING gate remote control ? 

No need to panic, our team is here at your service to assist using our expertise. First, consider reading the information sent with each 868-4C remote control. Our online store also provides tutorial videos for most E-KING remote controls. If you need any more help, you can call our free helpline. One of our specialists will take you through each step in order to help you program your gate remote control. You can even send us a photo using your mobile to +33 (0)616 962 454. This number is exclusively reserved for receiving MMS photos.

Frequently Asked Questions about this product

How do the programming of my E-KING remote control if i don’t have any remote control ?

If you don’t have an old remote control or any remote control that works, then you have to do the programming with the receiver by following the steps already mentioned above.
 

Why command your 868-4C remote control on our online store?

- Advantage 1 :

Wanting to receive your gate remote control as soon as possible? Choose 24-hour delivery anywhere on United Kingdom soil.
 

- Advantage 2 :

Purchase multiple remote controls and save money by taking advantage of our shipping offers.
 

- Advantage 3 :

Hoping to save time and be able to use your E-KING 868-4C gate remote control immediately? You’ll be glad to learn that all our remote controls come with batteries. This means that the user can quickly start using his item.

Our online store will lead you through each stage of the process of buying your E-KING 868-4C remote control.