Remote FAAC XT2 433 SLH

FAAC XT2 433 SLH is a portal remote control available only in one colour which is white.This remote control should not be confused with the same the identical model XT2 868 SLH. They do have the same appearance but they are not compatible.

The FAAC with the reference TX2 433 SLH is a Rolling Code remote for gates, it has 2 white buttons and operates under the frequency 433.92 MHz. 

Product description and properties

FAAC XT2 433 SLH remote control has been designed to optimize the daily comfort and guarantee the security of its users. 

This transmitter allows the easy opening and closing of your motorized gate. Only one pressing is going to drive your gate or garage door. 

This remote control is so prestigious thanks to its modern and sober design. Its white casing and rectangular shape give it a very elegant aspect. 

 

An auto-programming remote which is programmed either with the receiver or with an already-programmed remote. Having 2 mini buttons and easy to handle thanks to its very reduced size. 

For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the the main steps to assist you in programming your FAAC XT2 433 SLH gate remote control.

 

Important information

ATTENTION, 3 POINTS TO CHECK :

 

1- The model displayed here has a grey button border (433 MHz). Please do not confuse the XT2 433 SLH LR model (grey button border and logo) using the frequency 433.92 MHz with Faac XT2 868 SLH LR transmitter (black button border and logo) using the frequency 868.35 MHz. They are not compatible !

 

2-  Attention, this remote can't be programmed in condominium. If you live in a co-op, please get in touch with your syndic to find out if the receiver is locked by the installer. 

 

3- Please verify that you have a master model.  Only a master model can be used to program a new remote control. 

 

NOTE : The colour of the button border is connected to the frequency for this model. Remote control models with different frequencies are not compatible with each other.  

 

Warning : SHL model is not compatible with SL version of the brand FAAC.

Note : FAAC XT2 433 SLH exists also in  ”PROGRAMMABLE” version REF : 78700614”, used for communal buildings.

 

What do you need to know about this remote control ?

The remote control’s operation

XT2 433 SLH is compatible with all FAAC radio receivers of the version 433 SLH including FAAC RP 433 SLH receiver (pluggable on FAAC electronic board) and FAAC XR2 433 C receiver (pluggable to all automations electronic boards)

 

A high quality original FAAC xt2 433 slh remote with easy programming procedure from the receiver that requires no special equipment ! 

The XT2 433SLH is a handheld transmitter for opening automatic doors and gates.

 

FAAC XT2 433 SLH remote control replaces the following FAAC gate remotes:

• FAAC TML2 433 SLH

• FAAC T2 433 SLH

 

It is compatible with the following FAAC gate remotes: 

• FAAC DL2 433 SLH

• FAAC TML4 433 SLH

• FAAC XT4 433 RCBE

• FAAC XT4 433 SLH

 

Note : Two programming methods are possible for this model : auto-programming method or programming from the receiver FAAC XR2 433 C.

The 2-button remote control has a Rolling Code system with more bit encryption 66-bit and <20mA consommation. 

 

Faac XT2 433 SLH 2-channel rolling code key fob with a small size, it is powered by a long battery life 3V type CR2032. A distance up to 100 meters. It operates on temperatures from -20° to 55°.

Easy transmission of the coding. The programming only takes few minutes with the receiver or from an old remote control.

 

If you have difficulties in programming the remote, don’t worry, a manual is delivered with the remote control. 

 

Good to know

A gate remote control is an essential accessory that controls your motorized gate. 

To choose the good device, there are some of the criteria which must be considered. 

First of all, you should take account of your gate remote brand. The brand of your remote control must be the same as the one of your motorization. Otherwise, the automation that conducts your portal will no longer accept the command emitted by your gate opener.

Besides the brand of the equipments, it is also important to consider the number and the colour of your gate fob. This criteria is very important because it may define the frequency of your remote control. At last, you have to verify the type of programming of your transmitter. There are two different types: the programming in the receiver and the auto-programming. The aim of considering these criteria is to simplify the use of your gate remote. 

Ergonomics

FAAC XT2 433 SLH remote control is 63 mm long, a width of 40 mm and a thickness of 10 mm. Its small and reduced size makes it very simple to handle. It is a shock-resistant device which makes it very tough and strong under all kind of pressure or shocks. The handheld transmitter is easy to use thanks to its two tiny buttons and fits perfectly in your pocket or in your bag.

 

How to program FAAC XT2 433 SLH remote control ?

 

Important steps of the programming

 

Remarks: 

• Only master transmitters can transmit their programming codes.

• Remote Control Express only sells master remotes.

• The coding process will incite the opening of your garage door. We recommend you to program your remote control inside your garage in order to avoid any accident.

 

Programming of your new remote control:

There are several methods for programming your new transmitter.

 

Remote-to-remote programming :

Attention : During the process, if you press one of the buttons on the new remote first, you risk erasing the codes of all your already-programmed remote controls.

 

1. Place an already-programmed remote control next to the new one so they touch. Press the button P1 and P2 from your old remote at the same time. Keep them pressed down till the LED on your old remote blinks. Let the buttons go.

2. Press a button on your old remote control. While keeping the button pressed down, press the same button on your new remote. Keep them pressed down.

3. The LED on your new remote blinks twice. Let the buttons go.

4. Wait 10 seconds. Your new remote control is programmed.

 

Receiver-based programming : 

1. Open the casing of your receiver located next to your motor. Press both buttons P1 and P2 on your new transmitter. Keep them pressed down till the LED on your new remote blinks. Let the buttons go.

2. On the receiver board, press the programming button (SW1). When the LED light on the receiver blinks, release button.

3. While the LED on your new remote blinks, press a button on your new remote. Keep it pressed down till the LED on the receiver stays lit and then turns off.

4. Let the buttons go and wait 10 seconds.

5. Your new remote control is programmed. 

 

Can’t seem to program your FAAC XT2 433 SLH gate remote control ? 

No need to worry, we are available to help using our expertise. First of all, consider looking through the notice sent with each XT2 433 SLH remote control. our online store also provides instructional videos for most FAAC remote controls. If you need any more help, call our free helpline. One of our specialists will take you through each step in order to help you program your gate remote control. You can even send us a photo using your phone to +33 (0)616 962 454. This number is exclusively reserved for receiving MMS photos. 

 

Frequently Asked Questions about this product

How to recognize a master/slave FAAC XT2 433 SLH model ?

In order to determine if you have a master or a slave remote control, press a button on the remote control and keep it pressed down. If the LED light blinks once before remaining lit constantly, then it is a master model. If it goes on immediately and remains lit constantly, then it is a slave model and you will not be able to use it to program a new remote control.

 

Is it possible to program this remote control if i live in a co-op ?

The programming of this remote control is not possible if you live in a co-op. The registration may be locked by the guard, in this case you should check with the syndic.

 

About the brand FAAC

The company FAAC was founded in 1965. It is specialized as a market leader in the field of automation solutions in the home sector. Whether in the sector for buildings, industry or multi-family properties, FAAC offers reliable products, innovation and efficiency.

 

Access control for vehicles and pedestrians is the specialty of the company. You make the right choice when you opt for a remote control for FAAC gates or FAAC remotes for garage doors. If you are looking for a specific product, you are in the right place. With remotecontrol-express, you can easily find the garage door fob from FAAC that you need. This can be the remote Faac XT2 868 SLH, the remote Faac XT4 868 SLH, the remote Faac 433DS-2, the Faac XT2 433 SL or the remote Faac XT2 868 SLH BLACK, the TML4-433-SLH.

A few clicks are enough to buy the right remote control for garage doors or gates from FAAC. Whether you are private or commercial, we will help you.

 

Why order your FAAC XT2 433 SLH remote control on our online store? 

 

-Advantage 1 : 

Wishing to receive your gate remote control as soon as possible? Choose 24-hour delivery anywhere on United Kingdom soil.

 

-Advantage 2 : 

Purchase multiple remote controls and save money by taking advantage of our shipping offers.

 

-Advantage 3 : 

Hoping to save time and be able to use your FAAC XT2 433 SLH gate remote control straight away? You’ll be glad to know that all our remote controls come with batteries. As a result you can quickly start using your FAAC XT2 433 SLH remote control.
 

Our online store will lead you through each stage of the process of buying your FAAC XT2 433 SLH remote control.