Remote SEAV BE-HAPPY-S2

SEAV BE-HAPPY-S2 remote control available only in one colour which is black. This remote control can be ordered as a replacement to the old model SEAV BE-HAPPY-S2 BLUE (translucent) and is fully compatible with the new SEAV BE-HAPPY-S3 which is a 3 button model. The SEAV with the reference BE-HAPPY-S2 is a 2 button remote for gates, using the frequency 433.92 MHz. 

Product description and properties

To improve your daily comfort when using your motorized gate, SEAV BE-HAPPY-S2 remote control is the best option. By having this type of transmitter, you will reduce your efforts everytime you want to use your gate.

The original SEAV BE-HAPPY-S2 remote control will allow you to control your motorized gate remotely in a very simple way !

This transmitter is a switch programming type. It has 2 blue buttons and is easily used by its rectangular shape. 

For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the the main steps to assist you in programming your BE-HAPPY-S2 gate remote control.

Important information

WARNING: open your remote SEAV Be-Happy-S2 and look inside for a bank of small switches.

Please check the reference of your original SEAV remote. There are two models of the Be-Happy remote, one with and one without switches (internal mini switches used for programming the remote). 

The Be-Happy-S2 (the one displayed here) is the one with switches, switch programming (fixed code). 

The model without switches is the SEAV Be Happy RS2 (rolling code). You need to buy the right model to be able to program your remote, Be-Happy-S2 and Be-Happy-RS2 are not compatible.

What do you need to know about this remote control ?

The remote control’s operation

A high quality original SEAV BE-HAPPY-S2 remote control operates with a frequency of 433.92 MHz to emit signals to the receiver and is powered with a battery 3V.

The programming is done by a coding with 10 Switches. You can perform the settings of your remote control from an old remote model or from the receiver of your gate drive. 

Seav BE-HAPPY-S2 remote control replaces the following Seav gate remotes:

• BE-HAPPY-S1

• SEAV BE-HAPPY-S2 BLUE

It is compatible with the following Seav gate remotes: 

• BE-HAPPY-S3 

• SEAV TX1

• TX2

• TX3

• TXESA.

We supply a radio receiver compatible with all BE HAPPY versions as the one displayed here : SEAV RECEPT RES 2224.

Note: This transmitter exists in three buttons, it’s the  BE HAPPY S3 model.  

SEAV BE-HAPPY-S2 gate key fob is equipped with two buttons that control all the movements of your garage door according to your specifications. The frequency of this item is 433.92 MHz.  

The remote control is suitable for all SEAV gate automation systems and allows all automatic gates or garage doors operating on the 433MHz frequency. 

As for its programming, the device has a Switch programming. It is easily programmed from an existing remote or from the receiver.

BE HAPPY S2 a 2 channel remote control with an innovated design, it is powered by a 3V battery type CR2032. A range up to 100 meters outside and 35 meters inside !

Easy transmission of the coding (fixed code type) and easy programming (10 switches). 

The BE HAPPY-S2 operates at temperatures of -20°C +55°C.

Good to know

To program these transmitters with an existing transmitter simply press the small recess on the transmitter with a flat-head screwdriver and twist the screwdriver to remove the top cover. You will see a row of 10 small dip switches at the base, which will be up or down, set the new dip switches in the same positions as the existing transmitter and replace the covers.

The radio receiver may be located in different places depending on the configuration of your system. Sometimes it’s built-in your automatism board.

Ergonomics

Seav Be-Happy-S2 remote control is only 65 mm long, a width of 33 mm and a thickness of 16 mm. It is very lightweight and weighs only 20g. Its small and reduced size makes it very simple to handle and easy to use. It has two blue buttons in black casing. The handheld transmitter is a shock-resistant device which makes it very tough and strong under all kind of pressure or shocks.

How to program SEAV BE-HAPPY-S2 remote control ?

Important steps of the programming

Programming of your new remote control:

There are two methods for programming your new remote control

1- Remote-to-remote programming : 

• Open the casing of your programmed remote, you will see a row of small programmable numbered switches. They are in the ON or OFF position.

• Open the casing of your new remote, you will see a row of small programmable switches.

• Set them in the same way as in your already programmed remote.

• Your new remote control is programmed.

2- Receiver-based programming :

• Open the case of your receiver located next to your motor. You will see a row of small programmable switches. They are in the ON or OFF position.

• Open the casing of your new remote, you will see a row of small programmable switches.

• Set them in the same way as in the receiver.

• Your new remote control is programmed.

Remarks : 

• Certain remote controls contain one or two supplementary programmable switches which are separate from the main row. These must also be set in the same position as those in the remote control that is already programmed.

• If this does not work, try reversing the positions of the programmable switches with regard to the receiver or to your programmed remote control.

Finding it hard to program your SEAV BE-HAPPY-S2 gate remote control ? 

No need to worry, our team is here to assist using our expertise. 

Firstly, consider looking through the notice sent with each BE-HAPPY-S2 remote control. Our online store also provides tutorials for most SEAV remote controls. If you need any more help, you can call our free helpline. One of our experts will take you through each step in order to help you program your gate remote control. You can even send us a photo using your phone to +33 (0)616 962 454. This number is solely reserved for receiving MMS photos. 

Frequently Asked Questions about this product

How to program my SEAV BE-HAPPY-S2 without an old remote ?

If you don’t have any old remote control, all you need is to open the case of your receiver where you find the dip-switches and do the programming.

About the brand SEAV

SEAV is an italian brand, created in 1983. The brand manufacturers high quality automation systems for garage doors, industrial doors, electric gates and garage door operators.

 The company is committed to ensuring that its manufacturing processes are strictly adhered to in order to offer the best products to its clients. By choosing the brand SEAV you opt to 30 years of expertise in the automatism field. 

The most famous SEAV remote controls are : SEAV BE-HAPPY-S2, BE-HAPPY-S3, BE-HAPPY-RS2, LRX 2217 M, BE-EASY and the range of transmitters SEAV BE-SMART.

SEAV guarantee 100% original remotes with a warranty of 2 years.

Why buy your SEAV BE-HAPPY-S2 remote control on our website? 

-Advantage 1 : 

Wishing to take delivery of quickly? Choose 24-hour delivery anywhere in United Kingdom.

-Advantage 2 : 

Purchase multiple remote controls and save money by taking advantage of our shipping offers.

-Advantage 3 : 

Wanting to save time and be able to use your SEAV BE-HAPPY-S2 gate remote control straight away? You’ll be glad to know that all our remote controls come with batteries. This means you can quickly start using your SEAV BE-HAPPY-S2 remote control.
 

Our website will lead you through each stage of the process of buying your SEAV BE-HAPPY-S2 remote control.