Remote SEAV TXS2

SEAV TXS2 remote control available only in one colour which is grey. This remote control is replaced by the new compatible model SEAV BE-HAPPY-S2 and is fully compatible with the 3 button version SEAV TXS3. The SEAV with the reference TXS2 is a 2 button remote for gates, using the frequency 433.920 MHz. 

Product description and properties

Coding Type: Fixed code (contains dipswitches for programming)

To improve your daily comfort when using your motorized gate, SEAV TXS2 remote control is the best option. By having this type of transmitter, you will reduce your efforts every time you want to use your gate.

The original SEAV TXS2 remote control will allow you to control your motorized gate remotely in a very simple way!

This transmitter is a switch programming type. It has 2 blue buttons and is easily used by its rectangular shape. 

For more information on this gate fob, consider looking through the manual (PDF) or you can check out the video below which explains in detail all the main steps to assist you in programming your TXS2 gate remote control.

Important information

ATTENTION: Please verify the colour of the buttons on your remote control. The colour of the buttons is related to the frequency of this model. Remote controls with different frequencies are not compatible.

WARNING: DO NOT CONFUSE this remote control with the yellow button remotes ( 306 MHz) and white models (30.875 MHz)

WARNING: open your remote SEAV TXS2 and look inside for a bank of small switches.

Please check the reference of your original SEAV remote. 

The Seav TXS2 is a transmitter with switches, switch programming (fixed code). 

What do you need to know about this remote control?

The remote control’s operation

A high-quality original SEAV TXS2 remote control operates with a frequency of 433.92 MHz to emit signals to the receiver and is powered with a long battery life 12V.

The programming is done by coding with 10 Switches. You can perform the settings of your remote control from an old remote model or from the receiver of your gate drive. 

Seav TXS2 remote control replaces the following Seav gate remotes:

• BE-HAPPY-S1

• SEAV BE-HAPPY-S2 BLUE

It is compatible with the following Seav gate remotes: 

• BE-HAPPY-S3 

• SEAV TX1

• TX2

• TX3

• TXESA

We supply a radio receiver compatible with all BE HAPPY versions like the one displayed here: SEAV RECEPT RES 2224.

Note: This transmitter exists in six buttons, it’s the TXS6 model.  

SEAV TXS2 gate key fob is equipped with two buttons that control all the movements of your garage door according to your specifications. The frequency of this item is 433.92 MHz.  

SEAV TXS2 is an ideal way to control your motorized gates and garage doors. This grey case is set with dip switches. 

The remote control is suitable for all SEAV gate automation systems and allows all automatic gates or garage doors operating on the 433MHz frequency. 

As for its programming, the device has a Switch programming. It is easily programmed from an existing remote or from the receiver.

Seav txs2 a 2 channel remote control with an innovated design, it is powered by a 12V battery type. A range up to 100 meters!

Easy transmission of the coding (fixed code type) and easy programming (10 switches). 

Good to know

To program these transmitters with an existing transmitter simply press the small recess on the transmitter with a flat-head screwdriver and twist the screwdriver to remove the top cover. You will see a row of 10 small dip switches at the base, which will be up or down, set the new dip switches in the same positions as the existing transmitter and replace the covers.

The radio receiver may be located in different places depending on the configuration of your system. Sometimes it’s built-in your automatism board.

Ergonomics

Seav TXS2 remote control is only 62 mm long, a width of 36 mm and a thickness of 14 mm. It is very lightweight. Its small and reduced size makes it very simple to handle and easy to use. It has two blue buttons in a grey casing. The handheld transmitter is a shock-resistant device which makes it very tough and strong under all kind of pressure or shocks.

How to program SEAV TXS2 remote control?

Important steps of the programming

Programming of your new remote control:

If your keyfob contains a row of mini dip switches, you must follow these steps to program it : 

• Open the casing of your already-programmed remote.

• Open the casing of your new remote control.

• Make sure that the switches on the new remote are in the same position as your old remote by reproducing the same combination using a screwdriver. 

• Close the transmitters.

• Your remote control is successfully programmed.

Remarks : 

• Some remotes have one or two extra switches separated from the main row. These switches must also be in the same position as the ones in the old remote.

• If you don’t have an old remote, you can open the receiver because it also contains many switches. You have just to reproduce the same position of the switches in the remotes. 

Finding it hard to program your SEAV TXS2 gate remote control? 

Fear not, we are available to help using our expertise. First of all, consider reading the notice sent with each TXS2 remote control. our website also provides instructional videos for most SEAV remote controls. If you need any more help, you can call our free helpline. One of our experts will take you through each step to help you program your gate remote control. You can even send us a photo using your tablet to +33 (0)616 962 454. This number is exclusively reserved for receiving MMS photos.

Frequently Asked Questions about this product

How to program my SEAV TXS2 without an old remote?

If you don’t have any old remote control, all you need is to open the case of your receiver where you find the dip-switches and do the programming.

About the brand SEAV

SEAV is an Italian brand, created in 1983. The brand manufactures high-quality automation systems for garage doors, industrial doors, electric gates and garage door operators.

 The company is committed to ensuring that its manufacturing processes are strictly adhered to in order to offer the best products to its clients. By choosing the brand SEAV you opt to 30 years of expertise in the automatism field. 

The most famous SEAV remote controls are SEAV BE-HAPPY-S2, BE-HAPPY-S3, BE-HAPPY-RS2, LRX 2217 M, BE-EASY and the range of transmitters SEAV BE-SMART.

SEAV guarantee 100% original remotes with a warranty of 2 years.

Why buy your SEAV TXS2 remote control on our website?

- Advantage 1 :

Wishing to receive your gate remote control as soon as possible? Choose 24-hour delivery anywhere on United Kingdom soil.

- Advantage 2 :

Purchase multiple remote controls and save money by taking advantage of our shipping offers.

- Advantage 3 :

Wanting to save time and be able to use your SEAV TXS2 gate remote control straight away? You’ll be glad to know that all our remote controls come with batteries. As a result, you can quickly start using your SEAV TXS2 remote control.

Our online store will lead you through each stage of the process of buying your SEAV TXS2 remote control.